Arley Moss Supplies Blog - help

The following step by step guide explains: How to convert the Woodford Model 22 mixer tap from hot water under pressure (standard) to gravity fed.Tools needed: Adjustable spannerFlat Head Screwdriver Mole Grips / PliersTime needed: 3 minutesScroll to the bottom to see the video. Step 1: Undo the stem nut and remove the stem.Step 2: Locate the ru..

The following step by step guide explains: How to install the Woodford Model 22 mixer tap.Tools needed: 1-1/8" (28mm) drill bit and Drill6mm drill bit & 2 securing screws and rawlplugsExternal silicone fillerMarker Adjustable SpannerTime needed: 30-60 minutesScroll to the bottom to see the video. Step 1: Mark the centres of both pipes (5" or 127..

The following step by step guide explains: How to install the Woodford Model Y34 standpipe.Step 1. Dig hole for stand pipe approximately 2 feet in diameter and deeper than the bury depth.Step 2. Flush gravel, debris, etc. out of the supply line before connecting stand pipe.Step 3. Install stand pipe with drain hole below frost line. Use wrenches on..

The following step by step guide explains: How to find the right size tap for your installation.Tools needed: Tape measureTime needed: 1 minuteScroll to the bottom to see the video. Step 1: Measure the wall thickness, in this case it is 8" (203mm).The measurement is between the outer face of the drilled entry hole* to the outer face of the exit ..